Contents
Samsung TV Service Menu Details – For TV Repair
Service menu is a secret menu that is used to fix many problems with LCD LED TV. Also, this menu is the different menu from the user menu. You can change several settings in a LED TV by the help of remote.
Accessing the service menu of a Samsung LED TV requires entering a specific code using the remote control. However, I must emphasize that accessing the service menu can potentially affect your TV’s functionality, and making changes without proper knowledge can lead to unintended issues. Proceed with caution, and only use the service menu if you know what you’re doing.
Please note that the service menu codes can vary depending on the model and region of your Samsung TV. Additionally, newer models or firmware updates might change the method for accessing the service menu. As of my last knowledge update in September 2021, here’s a general method to access the service menu on a Samsung LED TV:
Note: Make sure the TV is turned on.
Using your TV’s remote control, press the following buttons in sequence:
Mute 1 8 2 Power.
The TV should turn off and then back on. When it turns back on, you should see the service menu displayed on the screen.
If the above method doesn’t work for your specific TV model, I recommend checking the user manual of your TV or searching for model-specific instructions online. Additionally, if you’re looking to make adjustments to your TV’s settings, it’s often safer and more user-friendly to use the standard on-screen menus provided by Samsung.
Samsung TV service menu you can rectify the following repairs.
1. Full Factory Reset.
2. Turn on Burning Mode.
3. Test Screen Pattern.
4. Screen Mirror.
5. Panel Mapping.
6. Check TV Board and Bios Information.
These are the common point, which you can do in a Samsung TV after open the service menu.
Samsung LED TV Service menu code for factory reset:
Samsung TV service menu advanced code:
Info + Menu + mute +Power On this is the most common and advanced service menu code of Samsung LED TV.
Samsung TV service mode Smart remote
1. (TV on) Mute + 1 + 1 + 9 + Enter
2. (TV off) P.STD + Help + Sleep + Power
3. (TV off) P.STD + Menu + Sleep + Power
4. (TV off) P.STD + Help + Sleep + Power
5. (TV off) P.STD + Menu + Sleep + Power
