LED TV Service Menu Code

LCD/LED TV Service Menu Codes

In this article,you know service menu codes for all tv brands. If you want to change advanced settings in your tv, then you have to go to the service mode of your led tv using the service menu code.
You can change advanced settings in your tv like many features can enable disable using service mode, we can change LVD Settings, and many more things. We would recommend you don’t try to open this secret service mode if you are new.

Admiral TV Service Menu Codes

Method 1
1. Tap the “MENU” button.
2. GO TO SOUND -> BALANCE
3. When Balance = “0,” enter 1969 in the sequence.
4. To the upper left of the screen, a “M” appears.
5. Press the “MENU” button.
6. Service / Manufacturing Menus on the OSD
7. To depart, hit the “power off” button.

Method 2
1. Press the “MENU” button.
2. GO TO SOUND -> BALANCE
3. When the balance is “0,” input the sequence 0532.
4. To the upper left of the screen, a “M” appears.
5. Press the “MENU” button.
6. OSD Menus for the Factory / Service
7. To depart, hit the “power off” button.

Avera TV Service Menu Codes

Method 1
1. Check that the set is turned on.
2. The Service menu should appear on screen after pressing Menu 1 1 4 7.
Method 2
1. Check that the set is turned on.
2. Press Menu 8 8 9 3 The service menu should show on the screen.

Method 3
1. Confirm that the set is turned on.
2. The service menu should appear on screen after pressing Menu 0 0 0 0.

Method 4
1. Check that the television is turned on.
2. Press Source 2 5 8 0 to bring up the service menu.

Amoi TV Service Menu Codes
1.Begin by turning off the television.
2.While turning on the television, press and hold the Source button on the remote control.

Akai TV Service Menu Codes

Method 1
1. Press the MENU button.
2. Then tap the 1, 9, 7, and 9 buttons.
3. The Service Menu will appear.
4. Turn off the power to escape.

Method 2
1. Turn on the power.
2. On the remote control, press the MENU, 8, 2, 0, and 2 buttons.
3. The Service Menu was shown.
4. Turn off the power to escape.

Blaupunkt TV Service Menu Codes

1.Turn on the television.
2.Press the Menu button.
3.In quick succession, press the buttons 1 1 4 7.
4.You will now be in the set’s service menu.

BGH TV Service Menu Codes

1.On the remote, press the menu button.
2.To get the entire menu, swipe right.
3.Scroll down to the sound section.
4.Select Advanced Audio Settings from the menu on the right.
5.Scroll down to the Balance slider and make sure it is set to 0.
6.Enter 1969 into your remote control.
7.The menu will vanish, and a green “M” will appear in the upper left corner.
8.When you press the menu button on the remote, a service menu will appear.

Bush TV Service Menu Codes

Method 1
1. Press the “Menu” button.
2. Press Source 8,8,9,3
3. Click the “OK” button.
4. To exit service mode, use the “Exit” button.

Method 2
1. Turn on the television.
2. Press “Source” and then “2” “5” “8” “0”
3. To exit the service menu, press the Exit key.

Beko TV Service Menu Codes

1.Check that the set is turned on.
2.Press Menu + 9 + 3 + 0 + 1 to open the menu.
3.You will now be in the set’s service menu.

Bang & Olufsen TV Service Menu Codes

1.Press the MENU button on the remote control.
2.Then click the 0 + 0 + GO buttons.

Coby TV Service Menu Codes

Method 1
1. Check that the television is turned on.
2. Press the Menu button.
3. Make certain that the “audio” menu is highlighted.
4. Press 8, 8, 9, 3, Mode.

Method 2
1. Check that the television is turned on.
2. Press the Menu button.
3. Make certain that the “audio” menu is highlighted.
4. Press 2 5 8 0 Source

Changhong Ruba TV Service Menu Codes

Method 1
1. Check that the television is turned on.
2. Press “Source” + “1” + “1” + “2” + “5”
3. You will now be in the set’s service menu.

Method 2
1. Check that the television is turned on.
2. Press “Source” + “3” + “1” + “3” + “0”
3. You will now be in the set’s service menu.

Method 3
1. Check that the television is turned on.
2. Press “Source” + “3” + “1” + “3” + “8”
4. You will now be in the set’s service menu.

Method 4
1. Check that the television is turned on.
2. Press Menu + 1 + 1 + 2 + 5 to open the menu.
3. You will now be in the set’s service menu.

Method 5
1. Check that the television is turned on.
2. Press Menu + 1 + 1 + 4 + 7 to open the menu.
3. You will now be in the set’s service menu.

Method 6
1. Check that the television is turned on.
2. Press Menu + 0 + 8 + 1 + 6 to open the menu.
3. You will now be in the set’s service menu.

Method 7
1. Check that the television is turned on.
2. Press “Menu” + “2”, “5,” “8,” and “0.”
3. You will now be in the set’s service menu.

Cello TV Service Menu Codes

Method 1
1. On the Remote, press the Menu button.
2. In quick succession, press 1,1,4,7.

Method 2
1. On the Remote, press the Source button.
2. In quick sequence, press 2, 5, 8, 0.

Method 3
1. On the Remote, press the Menu button.
2. In fast succession, press 4 7 1 1 4 7.

Dynex TV Service Menu Codes

Method 1
1. First, Press the INPUT button
2. press 2,5,8,0 after the input button.

Method 2
1. Press Menu,
2. then 1, 9, 9, 9,
3. Press ENTER.

Daewoo TV Service Menu Codes

Method 1
1. Turn on the TV.
3. Use the Source, Right Arrow, and Down Arrow keys.

Method 2
1. Turn on the television.
2. Using the factory remote’s key, access the main menu.
3. Emphasize the picture menu choice.
4. Press “9”, “3”, “0”, “1” Keys

Durabase TV Service Menu Codes

1.On the remote, press the Menu button.
2.Press 4, 7, 2, and 5 quickly.

Ecostar TV Service Menu Codes
Method 1
Press {Menu} {2} {0} {0} {8}

Method 2
Press “Menu” {8} {2} {0} {2}
Element TV Service Menu Codes
1.Use the remote to press Menu.
2.Once you press 0000, the service menu will appear.

FFalcon TV Service Menu Codes

1.Turn on the TV and press Menu.
2.Pick the Picture Menu.
3.Choose Contrast Submenu
4.Press 9, 7, 3, 5
5.Press the enter or return key after selecting FAC HOTKEY.

Finlux TV Service Menu Codes
1.On the remote, press the Menu button.
2.Press 4, 7, 2, and 5 quickly.

Funai TV Service Menu Codes

Method 1
1. Turn off the power.
2. Press & Hold down the TV’s “MENU” button.
3. Then, hit the TV’s “STANDBY-ON” button.
4. The Service Menu will appear when the TV turns on.
5. Press the STANDBY-ON button on the TV to leave.

Method 2
• 1. Use the TV’s “POWER” button to turn the power on.
• 2. Press the STANDBY-ON, 2, 7, 1, and MUTE buttons on the remote control.
• 3. You will see the service menu.
• 4. Press the STANDBY-ON button on the remote to leave.
Method 3
• 1. Turn off the power.
• 2. Press & Hold down the SETUP button on the TV.
• 3. Then, on the TV, hit the STANDBY-ON button.
• 4. The TV will switch on and display the Service Menu.
• 5. To depart, turn off the TV by pressing the STANDBY-ON button.
Method 4
• 1. Press the CH – and VOL – buttons simultaneously.
• 2. Then click the MENU button.
• 3. The Service Menu was shown.
• 4. Turn off the power to escape.
Method 5
• 1. Press the CH+, CH -, and VOL + buttons simultaneously.
• 2. Then press the MENU button.
• 3. The Service Menu could be seen.
• 4. Turn off the power to escape.

Grundig TV Service Menu Codes

Method 1
• 1. Press the I button.
• 2. Then, press ‘OK’, ‘SERVICE,’ and ‘OK.’
• 3. Enter ‘8500’ as the Service Code.
• 4. The Service Menu will appear.
• 5. Turn off the power to escape.
Method 2
• 1. While the TV is in standby mode,
• 2. press and hold the i button on the remote while simultaneously pressing the POWER button on the TV.
• 3. The TV will switch on and display the Service Menu.
Method 3
• 1. Press and Hold down the i button for a few seconds.
• 2. Then type in the service code ‘8500’.
• 3. The Service Menu will appear.
• 4. Press the TXT button to depart.
Method 4
• 1. While the TV is in standby mode, press and hold the P/C button on the remote
• 2. while simultaneously pressing the POWER button on the TV.
• 3. The TV will switch on and display the Service Menu.
• 4. Turn off the power to escape.
Method 5
• 1. Begin by turning off the television.
• 2. While pushing the POWER button on the TV, press and hold the MENU button.
• 3. Wait until the power light illuminates before pressing the POWER button on the remote.
• 4. The Service Menu will appear.
Method 6
• 1. On the remote control, press the DISPLAY, MUTE, SLEEP, and FUZZY buttons.
• 2. The Service Menu will appear.

Hannspree TV Service Menu Codes

1. Check that the television is turned on.
2. In a fast succession, press INPUT 0 2 3 6 3 MENU.

Haier TV Service Menu Codes

Method 1
• 1. Turn on the television.
• 2. Press “Source” 2 5 8 0
• 3. To exit the service menu, press the Exit key.
Method 2
• 1. Press the Menu button.
• 2. Press Source 8 8 9 3
• 3. Press OK
• 4. To exit the service mode, press EXIT
Method 3
• 1. Turn on the television.
• 2. Press Menu 1 9 9 9
• 3. To exit the service menu, press the Exit key.

Horizon TV Service Menu Codes

Method 1
• 1. Go to the “Main Menu” and select the “Install Menu.”
• 2. Then, tap the 4 7 2 5 buttons.
• 3. The Service Menu will appear.
Method 2
• 1. Enter the ‘Main Menu.’
• 2. Then, tap the 4 7 2 5 buttons.
• 3. The Service Menu will appear.

Hisense TV Service Menu Codes

1. On the remote, press the menu button.
2. To get the entire menu, swipe right.
3. Scroll down to the sound section.
4. Select Advanced Audio Settings from the menu on the right.
5. Scroll down to the Balance slider and make sure it is set to 0.
6. Enter 1969 into your remote control.
7. The menu will vanish, and a green “M” will appear in the upper left corner.
8. When you press the menu button on the remote, a service menu will appear.

Hitachi TV Service Menu Codes

Method 1
• 1. Turn off the television.
• 2. Hold down the INPUT button on the TV and then hit the POWER button.
• 3. Hold both buttons down until the TV turns on and the Service Menu appears.
• To choose items, use the UP and DOWN arrows.
• To alter the data, use the LEFT and RIGHT arrows.
• To quit the Service Menu, use the EXIT button.
Method 2
• 1. Turn on the television.
• 2. On the remote, press the MENU MENU 8 SELECT buttons.
• 3. The Service Menu will appear.
• To choose items, use the UP and DOWN arrows.
• To alter the data, use the LEFT and RIGHT arrows.
• To quit the Service Menu, use the EXIT button.
Method 3
• 1. Turn off the television.
• 2. For more than 3 seconds, hold down the POWER and INPUT buttons on the TV.
• 3. The Service Menu will appear.
• 4. The letter “P” stands for image, and the letter “A” stands for audio.
• To choose items, use the UP and DOWN arrows.
• To alter the data, use the LEFT and RIGHT arrows.
• To quit the Service Menu, press the EXIT key.
Method 4
• 1. Turn on the television.
• 2. CATV mode should be selected.
• 3. SOURCE should be pressed.
• 4. Enter 3195 in the sequence.
• 5. To depart, hit the “power off” button.

Insignia TV Service Menu Codes

1. Turn the set on.
2. Set the volume to zero.
3. Input 9876 with the remote, then OK within 5 seconds.
4. If you are successful, you should visit FACTORY SET MENU.
Intex TV Service Menu Codes
Method 1
• 1. Check that the television is turned on.
• 2. Press Menu + 8 + 8 + 9 + 6 to open the menu.
• 3. You will now be in the set’s service menu.
Method 2
• 1. Check that the television is turned on.
• 2. Press Menu + 1 + 1 + 4 + 7 to open the menu.
• 3. You will now be in the set’s service menu.
Method 3
• 1. Check that the television is turned on.
• 2. Press Input + 2 + 5 + 8 + 0 to begin.
• 3. You will now be in the set’s service menu.
Method 4
• 1. Check that the television is turned on.
• 2. Press Menu + 8 + 2 + 0 + 2
• 3. You will now be in the set’s service menu.

JVC TV Service Menu Codes

Method 1
• 1. Press the “Display” and “Video Status” buttons on the remote control at the same time.
• 2. To modify an item, use the ‘Menu Up’ and ‘Menu Dn’ buttons.
• 3. Use the (>) or () buttons on the remote control to alter the data value to the specified item.
• 4. To exit service mode, use the “EXIT” button.
Method 2
• 1. Go to the User Menu screen by pressing the MENU button and ensuring that the indication (arrow) points to and indicates the “Picture Control.”
• 2. The top buttons on the remote are set to TV and VCR, respectively.
• 3. Set the sleep timer to “0” minutes and concurrently push the VIDEO STATUS and DISPLAY buttons while it is displayed.
• 4. The Service Menu will appear.
• 5. To exit the Service Menu, press the BACK button.

Konka TV Service Menu Codes

Method 1
• 1. Using the manufacturer remote control, first push the Menu button, then the RECALL button five times.
• 2. The service menu is now active.
Method 2
• 1. Using the factory remote, push the MENU button once, then the PRE button five times.
• 2. The service menu is now active.

Kogan TV Service Menu Codes

1. Turn the TV ON
2. Press Menu on Remote
3. Then, Press 2 0 0 8

Iiyama TV Service Menu Codes

1. Turn off the display.
2. While holding down the MENU button, press the POWER button twice.
3. Then, while holding down the – button, push the POWER button again.
4. To enter the Service Mode, press the MENU button.
5. Press the POWER button to exit.

Luxor TV Service Menu Codes

1. On the Remote, press the Menu button.
2. In fast succession, press 472 25.

Logik TV Service Menu Codes

1. Begin by turning off the television.
2. While turning on the television, press and hold the Source button on the remote control.

Lloyd TV Service Menu Codes

• Check that the set is turned on.
• 2. Press Menu + 1 + 1 + 4 + 7 to open the menu.
• 3. You will now be in the set’s service menu.

Loewe TV Service Menu Codes

Method 1
• 1. On the TV’s front panel, press the MENU button.
• 2. Choose “Service” from the menu.
• 3. On the remote, press the MENU button.
• 4. The Service Menu will appear.
• 5. Turn the set off to exit.
Method 2
• 1. On the TV’s front panel, press the FUNCTION button.
• 2. Hold down the CH – button on the remote until the Service Menu appears.
• How to use the remote control buttons:
• The CH+ and CH- buttons go through menus.
• The OK button makes choices.
• The buttons VOL+ and VOL – modify the menu items.
• The OK button saves a specific setting.
Method 3
• 1. On the TV’s front panel, press the MENU button 5 times. The notification “Service” will appear on the screen.
• 2. Then, on the remote, push the MENU button.
• 3. The Service Menu will appear.
• 4. Turn the set off to exit.

Micromax TV Service Menu Codes

1. Enter the “Picture” submenu in the OSD using the remote.
2. Select the “contrast” item and press 9 7 0 5.
3. The Service Menu will appear on the left side of the screen.

Matsui TV Service Menu Codes

Method 1
• 1. While the TV is in standby mode,
• 2. press and hold the I button on the remote while simultaneously pressing the POWER button on the TV.
• 3. The TV will switch on and display the Service Menu.
• 4. To pick menus/options, use the UP/DOWN arrows.
• 5. To change settings, use the LEFT and RIGHT buttons.
• 6. Turn off the power to escape.
Method 2
• 1. Turn off the television.
• 2. While pushing the POWER button on the TV, press and hold the MENU button.
• 3. Wait until the power light illuminates before pressing the POWER button on the remote.
• 4. The Service Menu will appear.
• 5. To pick options, use the P+ and P- buttons.
• 6. To change settings, press the VOL+ and VOL- buttons.
• 7. Turn off the power to escape.
Method 3
• 1. Reduce the volume all the way to ‘0.’
• 2. Then, for a few seconds, press and hold the VOL – button on the TV and the 9 button on the remote control.
• 3. The Service Menu will appear.
• 4. To pick items, use the ch+ and ch- buttons.
• 5. To alter values, press the VOL+ and VOL- buttons.
• 5. Press the 8 button to exit.

Marantz TV Service Menu Codes

On the remote control, press the MENU, SAP, SLEEP, and MAGIC buttons.

Mitashi TV Service Menu Codes

Method 1
• 1. Check that the television is turned on.
• 2. Press Source + 2 + 5 + 8 + 0
• 3. You will now be in the set’s service menu.
Method 2
• 1. Check that the television is turned on.
• 2. Press Menu + 2 + 5 + 8 + 0
• 3. You will now be in the set’s service menu.
Method 3
• 1. Check that the television is turned on.
• 2. Press Menu + 8 + 2 + 2 + 2 + 2
• 3. You will now be in the set’s service menu.
Method 4
• 1. Make sure the TV is turned on.
• 2. Press Menu + 1 + 1 + 4 + 7
• 3. You will now be in the service menu of the set.
Method 5
• 1. Check that the television is turned on.
• 2. Press Menu + 0 + 0 + 0 + 0 + 0
• 3. You will now be in the set’s service menu.

Noblex TV Service Menu Codes

Method 1
• 1. Press the “MENU” button.
• 2. GO TO SOUND -> BALANCE
• 3. When Balance = “0,” enter 1969 in the sequence.
• 4. To the upper left of the screen, a “M” appears.
• 5. Press the “MENU” button.
• 6. Service / Manufacturing Menus on the OSD
• 7. To depart, hit the “power off” button.
Method 2
• 1. Tap the “MENU” button on the Remote
• 2. GO TO SOUND -> BALANCE
• 3. When the balance is “0,” input the sequence 0532.
• 4. To the upper left of the screen, a “M” appears.
• 5. Press the “MENU” button.
• 6. OSD Menus for the Factory / Service
• 7. To depart, hit the “power off” button.

Nokia TV Service Menu Codes

Method 1
• 1. Turn off the television (Standby).
• 2. On the remote, press the 372 POWER buttons.
• 3. The Service Menu will appear.
• 4. Turn off the power to escape.
Method 2
• 1. Turn on the television.
• 2. On the remote, press the MUTE and OK TV buttons.
• 3. The Service Menu will appear.
Method 3
• 1. On the remote, press the -/— MENU TV buttons.
• 2. The Service Menu will appear.
• 3. Turn off the power to escape.
Method 4
• 1. On the remote, press the i, M, PROG buttons.
• 2. The Service Menu will appear.
• 3. To leave, press the TV button or turn off the power.
Method 5
• 1. On the remote, press the MENU and TV I buttons.
• 2. The Service Menu will appear.
• 3. Press the TV button to exit.

Onida TV Service Menu Codes

1. Check that the set is turned on and showing a picture.
2. On the factory remote, press the source button.
3. Navigate to the audio configuration page.
4. The factory menu will be displayed if you press 2, 5, 8, or 0.

Proscan TV Service Menu Codes

1. On the remote, press INPUT.
2. Then press the 2580 button.

Polaroid TV Service Menu Codes

1. Turn on the television.
2. Hold down the VOL+ and CH+ buttons.
3. The Service Menu will appear.

Panasonic TV Service Menu Codes

Method 1
• 1. Hold down the TV’s VOL – button.
• 2. Then, on the remote, push the 0 button three times.
• 3. To exit, either hit the EXIT button or switch off the power.
Method 2
• 1. ON THE TV, press and hold the VOL – button.
• 2. On the remote, press the RECALL or INFO button three times.
• 3. The Service Menu will appear.
• 4. To exit service mode and save, power off.

Philips TV Service Menu Codes

Method 1
On the remote, press the 0, 6, 2, 5, 9, 6, and MENU/HOME buttons.
Method 2
On the Remote, Press the 0 6 1 5 9 6 and MENU/HOME buttons
Method 3
On the Remote, Press the 0 6 2 5 9 6 and OSD/STATUS/INFO buttons
Method 4
On the Remote, Press the 1 2 3 6 5 4 buttonsMethod 5
On the Remote, Press the 0 6 2 5 9 7 and MENU/HOME buttons
Method 6
On the Remote, Press the 0 6 2 5 9 6 and INFO buttons
Method 7
On the Remote, Press the 0 6 1 5 9 7 and MENU/HOME buttons

Roadstar TV Service Menu Codes

1. Press “MENU,” “9,” “3, “0,” and “1.”
2. It will then show the service menu.
3. Press the “TV/TX” button to leave.

Sony TV Service Menu Codes & Instructions

Method 1
Press the following buttons on the remote control once the TV is in standby mode: Displaying “5” {POWER}
Method 2
Press the following buttons on the remote control once the TV is in standby mode: Displaying “5” A “VOL+” “POWER”
Method 3
Press the following buttons on the remote control once the TV is in standby mode: Display “5” PICTURE + POWER
Method 4
Press the following buttons on the remote control once the TV is in standby mode: Display “5” {VOL+} {PICTURE} {POWER}

Sanyo TV Service Menu Codes

Method 1
1. Unplug the power supply.
2. While inserting the power cable back into the outlet, press and hold the MUTE button on the remote control.
3. Continue to press the MUTE button until the TV turns on and the Service Menu appears.
4. To pick menus, use the ch+ and ch- buttons.
5. To alter the settings, press the VOL+ and VOL – buttons.
6. Some menus may include sub-addresses. To modify sub-item data, use the numeric buttons 0 to 7.
7. To depart, use the MENU button or turn off the TV.
Method 2
1. Unplug the power supply.
2. While putting the power wire back into the outlet, press and hold the VOL – button on the TV.
3. Continue to push the VOL – button until the TV turns on and the Service Menu appears.
4. To pick menus, use the ch+ and ch- buttons.
5. To alter the settings, press the VOL+ and VOL – buttons.
6. Some menus may include sub-addresses. To modify sub-item data, use the numeric buttons 0 to 7.
7. To depart, use the MENU button or turn off the TV.

Seiki TV Service Menu Codes

1. On the remote, press Menu.
2. After that, press 0000 to access the service menu.
Sceptre TV Service Menu Codes
Method 1
In succession, press Menu 7 3 4 3.
Method 2
Press Source 7 3 4 3 in quick succession.

Sylvania TV Service Menu Codes

Method 1
1. Check that the set is turned on.
2. Press Menu 8 8 9 3 The service menu should show on the screen.
Method 2
1. Check that the set is turned on.
2. Press Menu 1 1 4 7 Service menu should show on screen.
Method 3
1. Make sure the television is on.
2. Press 0 0 0 0 to bring up the service menu.
Method 4
1. Make sure the television is on.
2. Press Source 2 5 8 0, and the service menu should display.
Sansui TV Service Menu Codes
1. Check that the set is turned on and showing a picture.
2. Press the menu button on the OEM remote.
3. Navigate to the audio settings page.
4. Press 8, 5, 2, 3 and the service menu is displayed.

Sansei TV Service Menu Codes

Method 1
1. Press the “MENU” button.
2. GO TO SOUND -> BALANCE
3. When the balance is “0,” input the sequence 0532.
4. To the upper left of the screen, a “M” appears.
5. Press the “MENU” button.
6. Factory / Service OSD Menus
7. To depart, hit the “power off” button.
Method 2
1. Press the “MENU” button.
2. GO TO SOUND -> BALANCE
3. When Balance = “0,” enter 1969 in the sequence.
4. To the upper left of the screen, a “M” appears.
5. Press the “MENU” button.
6. Factory / Service OSD Menus
7. To depart, hit the “power off” button.

Samsung TV Service Menu Codes

Method 1
1. Set the television to standby.
2. Press MUTE on the remote, then 1, 8, 2, and then POWER in order.
3. If all went well, the service menu will now appear.
Method 2
1. Set the television to standby.
2. Press the following buttons in order on the remote: Info, Menu, Mute, Power.
3. If all goes well, the TV will switch on and presently show the service menu.
Put the TV ON Standby Mode and then try the below methods.
Method 3
Press the DISPLAY, P.STD, MUTE, and POWER buttons on the remote control while the TV is in standby.
Method 4
Press the “SLEEP,” “P.STD,” “MUTE,” “POWER,” and “TV” buttons on the remote while the TV is in standby.
Method 5
With the television on standby. On the remote, press MUTE followed by 1 1 9 ENTER in that order.
Method 6
While the TV is in standby mode, press the DISPLAY MENU MUTE POWER button on the remote.

Subramanian
Subramanian

Subramanian MK, currently serving as a workshop instructor at Sakthi Polytechnic College, Erode Tamil Nadu. With a career spanning 25 + years, Subramanian MK has dedicated himself to advancing knowledge in Electronics and Communication Engineering (ECE). His passion for exploring new technologies has led to the development of numerous projects, showcasing expertise in IoT and PCB design.

Articles: 508

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

×

Hi, How can I help you?

×