Arduino Based Shock Detection with SMS Alert System
The circuit continuously monitors the leakage from an electronics gadget by sensing the potential in its body. When there is leakage from the body, the potential exists across the neutral end and the body of the gadget, MCU (Microcontroller Unit) sends output signal to the buzzer.
When an electrical industry meets with an accident, there is a chance that the individual may suffer from a serious injury or expire instantaneously and there is no one around to help him. Well this system has a solution to the problem. The system acts as a shock identification system that gathers and sends this information that met with an accident, and conveys it to the nearest control room.
Here in this project, going to build an Arduino based shock Detection with SMS system using GPS, GSM android based. Shock detector detects the sudden change in the flow neutral current and GSM module sends the alert message on your Mobile Phone with the location of the accident. Location of accident is sent in the form of Google Map link, derived from the latitude and longitude from GPS module. The Message also contains the correct location.

About the Author


Hello! My Dear Friends. I am Subramanian. I am writing posts on androiderode about Electronics testing and equipments.

View All Articles