How to interface a high current TRIAC with AT89C52 microcontroller. Here we will connect a load lick AC motor in series with anode of the Triac and Gate is controlled by MCU simple C program. Component required: 1. AT89c51. 2.…
How to interface LCD with Microcontroller How to interface LCD with Micro-controller? LCD Liquid Crystal Display is commonly used in the electronic display module. 16×2 LCD is used for wide range of micro-controller applications. It can display 2 lines of…
Line Follow Robot with Atmega8 microcontroller DIY – Means Do It yourself. Make simple and Low cost LFR-Line Following Robot using AT89c51 Micro controller IC. A line follow robot is autonomous robot that follows here my robot either BLACK LINE…
PIC Microcontroller: Only 35 single-word instructions to learn All single-cycle instructions except for program branches, which are two-cycle Operating speed: DC – 20 MHz clock input DC – 200 ns instruction cycle Up to 8K x 14 words of Flash Program Memory, Up to…
Women safety device with GPS tracking & alerts using nodeMcu With all the technology available to us in recent times, it’s not hard to build a safety device for women which will not only generate an emergency alarm but also…
Hi, How can I help you?
